Today I’m going to share some points on how to check your Broadband Speed Test free in 2020 and how to quickly get Free Internet Speed test results in 2020. This is usually done by two methods the most common one is literally just going onto Google and searching Free Internet Speed Test. So, if I quickly do this here and as you can see there’s plenty of different results just like below Screenshot but if if you are looking for accurate speed test. Then read this blogpost completely.
Broadband Speed Test
You can do a Broadband speed test usually by two methods. First one is just type speed test on google and google will tell you approx Broadband speed test. Another method is to find through CMD(command line window). I honestly prefer what you need to do is follow below some steps:-
- You need to go into your Start menu.
- then you are going to type CMD or command prompt both of which will bring up CMD
- Now you have to just open it and it looks obviously like this little command system
- Here some of you may be comfortable or familiar with command prompt some of you may not it’s a very easy command.
- You’re going to type Ping google.com and press Enter.
This is basically telling command prompt to perform a Speed Test. It’s going to send out a request to an IP address or you can use a web address as long as you use the full address both of these ways will send out a request to the server and it all once a response receives it’ll send it back. You can see here I’m guessing the reply from Google’s IP address remember in one of my other Post. This is obviously in the ipv4 format it also shows you what address you’re pinning. Which is also shown here how many megabytes or gigabytes it’s sending for testing purposes.
Free Internet Speed Test:-
In the Free Internet Speed Test, it took a long time to get a response so my average speed of the quickest time I had was 11 milliseconds and the longest it took me was 20 milliseconds so I’m getting an average of 14 milliseconds in response time. If your Internet’s providing very slow speed that this can be in the hundreds. I’ve seen speed many times in the thousands before and sometimes you’ll just get a failed request or no response from the server. Another way to check your Broadband speed test is below.
Check my Broadband Speed:-
Check my broadband speed method with the connection. Now I’m just going to demonstrate what that looks like by temporarily disabling my internet and you can also do that by going and change adapter settings and simply disabling your network cruiser and try doing the ping test again quite simply because there’s no internet ping request and could not find the host.
This method is used to check my broadband speed test without internet. So, basically it can locate anywhere on the internet which usually means there’s an issue with your internet connectivity or you adjust your adapter. This is the easiest thing If you are using an Ethernet cable check it’s plugged in or not. It could be broken or if your Wi-Fi is having any trouble.
Check my Internet Speed:-
I basically try to use the different device in order to check my internet speed. let’s go ahead and do the ping test again and Check my internet speed again here you can see below that I’m coming back at 14 milliseconds average now in some cases especially on my computer.
I do find it weird that some time for no reason at all speed goes to very slow and it will cut in and out so it will have a response time the 100 then 500 then 300 then 800 and it will have some failed response times no response received now if that happens as I said the easiest thing to do is literally just turn off your network adapter and turn it back on again a lot of people think to do this you have to right-click and do troubleshoot problems.
Broadband Speed Test Troubleshooting:-
For this, you will need to be an administrator to do all Broadband Speed Test Troubleshooting. Troubleshooting makes your life a lot easier and it does the job that you should be waiting five to ten minutes for the computer to figure out to do. I just pull this down here troubleshoot problems and you would get just by right-clicking your Wi-Fi or Ethernet adapter. You don’t need to do that at all as just go into open network and Sharing Center and click settings and just disable and re-enable it.
You can also do Broadband Speed Test Troubleshooting using cmd. It’ll send a constant and non-stop request until you specify it to stop. I personally just use AB command prompt when I don’t need it. Don’t worry about broadband charges or anything like that this is basically a good way to see in real-time how quickly your Internet’s going.
I’m not having any problems everything’s going hunky-dory. If it’s giving you very varied responses just trying restarting your network adapter give it about a minute two minutes after it’s being restarted and then give it another shot you can restart your PC or your Mac but I don’t think that would be required anyway.
I hope this post was helpful and if you have any questions just leave them below.